Eccentric Hole Grooved Pipe End Cap
| Product Name | Eccentric Hole Grooved Pipe End Cap |
| Model No. | XGQT061 |
| Specifications | Available with various drain port configurations |
| Category | Pipe Fittings |
| Manufacturer | Shandong Lede Machinery Co., Ltd. |
Product Introduction
The eccentric hole end cap features an off-center drain or vent port, allowing liquid drainage or air venting from a capped pipeline end.
Features
- ✓Off-center drain/vent port
- ✓Ideal for system drainage
- ✓Ductile iron
Technical Data
Model: XGQT061
| Nominal Size (mm/in) | Pipe O.D (mm/in) | L (mm) | Working Pressure (psi) |
|---|---|---|---|
| 50×25 / 2×1 | 60.3×33.7 / 2.375×1.327 | 23.8 | 300 |
| 50×32 / 2×1¼ | 60.3×42.4 / 2.375×1.669 | 23.8 | 300 |
| 50×40 / 2×1½ | 60.3×48.3 / 2.375×1.9 | 23.8 | 300 |
| 65×50 / 2½×2 | 73.0×60.3 / 2.875×2.375 | 23.8 | 300 |
| 65×25 / 2½×1 | 76.1×33.7 / 3×1.327 | 23.8 | 300 |
| 65×32 / 2½×1¼ | 76.1×42.4 / 3×1.669 | 23.8 | 300 |
| 65×40 / 2½×1½ | 76.1×48.3 / 3×1.9 | 23.8 | 300 |
| 65×50 / 2½×2 | 76.1×60.3 / 3×2.375 | 23.8 | 300 |
| 80×25 / 3×1 | 88.9×33.7 / 3.5×1.327 | 23.8 | 300 |
| 80×32 / 3×1¼ | 88.9×42.4 / 3.5×1.669 | 23.8 | 300 |
| 80×40 / 3×1½ | 88.9×48.3 / 3.5×1.9 | 23.8 | 300 |
| 80×50 / 3×2 | 88.9×60.3 / 3.5×2.375 | 23.8 | 300 |
| 100×40 / 4×1½ | 114.3×48.3 / 4.5×1.9 | 25.4 | 300 |
| 100×50 / 4×2 | 114.3×60.3 / 4.5×2.375 | 25.4 | 300 |
| 125×50 / 5×2 | 139.7×60.3 / 5.5×2.375 | 25.4 | 300 |
| 125×50 / 5×2 | 141.3×60.3 / 5.563×2.375 | 25.4 | 300 |
| 150×50 / 6×2 | 165.1×60.3 / 6.5×2.375 | 25.4 | 300 |
| 150×40 / 6×1½ | 168.3×48.3 / 6.63×1.9 | 25.4 | 300 |
| 150×50 / 6×2 | 168.3×60.3 / 6.63×2.375 | 25.4 | 300 |
| 200×50 / 8×2 | 219.1×60.3 / 8.625×2.375 | 28 | 300 |
Dimension Drawing
